Stucco Repair Jacksonville can be utilized on virtually any crack that’s not a surface fault but needs repair due to age or weathering. The repair is done by injecting a mixture of resins and fixatives. It’s not a coating, per se, although there is some cement used to help bond the resins together. Most cracks are small enough that the mixture will work with little or no additional drying time. The combination is usually a binder and solvent in a base such as Xylan-Dry Film Lubricants.
The basic stucco repairs are done in much the same way as traditional Stucco. However, traditional Stucco is slightly more brittle and needs further repair. To repair a stucco crack:
- Start by lining the area up with a stucco cutter and then drive the knife across the line several times to ensure the cut is straight.
- Take a piece of wood or other material that can be bent and glue it along the line to act as a base for the stucco fixative.
- Apply one or two layers of fixative to the base, and then apply another layer of Stucco over top of that until you get to the desired thickness.
Let the stucco cure for a minimum of 24 hours before sanding it off.
When you have a wooden structure, such as a barn or a house, that has a stucco crack or few others like it in the place, you can apply three coats of Stucco Repair. Before using the stucco repair, you must first prepare the area entirely with a brush or roller and a plastic sheet so that the entire area is evenly coated. After that, the repaired area must be covered with three coats of building paper. Three coats are usually sufficient to fix minor damage, but if the damage is significant, you may want to apply two or even three coats of Stucco Repair. However, if you do so, make sure that there is enough building paper to cover the entire area of the damaged area so that the Stucco does not dry between coats.
When you apply Stucco Repair to your wooden structure, it is important to realize that there are three different types of Stucco that you can apply to your building’s exterior walls. These include natural, synthetic Stucco and polyester-based Stucco. Natural Stucco consists of limestone or marble stones that are impregnated with water-resistant clay or lime compounds. This type of Stucco is very good at withstanding weather.
Synthetic Stucco is made from chemical compounds called silica, fiberglass, and aluminum oxide. These compounds are mixed together using various chemical processes in order to achieve various thicknesses. With the right processes, the Stucco can be molded into the desired thickness. Although this type of Stucco is durable, it can be easily damaged by high winds or high precipitation. In addition to that, it can also lose its color and texture due to the continuous exposure to sunlight and the elements.
Low Maintenance Stucco Siding is another popular type of stucco installation that is preferred by many homeowners. This is because it is very easy to maintain. Since the material used to install it has very little or no texture, it can be easily cleaned with mild soap and water. Moreover, you need not to apply any repainting product for its maintenance.
Besides Low Maintenance Stucco, another option for repairing damaged Stucco is the application of Wood Lath. It is composed of various wood chips and bark, thus, it is similar to the texture of wood. It is a much better repair option than the previous one mentioned above. Compared to the former, the wood lath is easier to install. However, it cannot resist damages that easily occur during windy days or when exposed to moist conditions, like the case when it is raining.
These are just some of the different materials that can be used to repair damaged Stucco. You should always choose the one that is best suited for the problem. However, there are several factors that must be considered before selecting a material. Some of them are the durability, color, texture, and the level of moisture resistance. By knowing more about these options, you will be able to select the most suitable stucco application for your home.