Stucco is often one of the most complex kinds of paint to remove. However, if you are diligent and patient, it can be removed successfully. It would help if you started cleaning up all of the debris from your walls so that no other dirt particles can cause the stucco to look messy.
To begin your Stucco Removal Toronto project, the surface you are working on must be thoroughly cleaned. For complete stucco removal, an inexpensive sledgehammer must be employed to gently tap into the wall to loosen any large stones or chips present. Keep on tapping until the entire stucco starts to crumble and break down into large chunks. Pull as many big pieces as you can out of the wall using your hands. This can sometimes take quite a while, depending upon how much siding has been damaged.
Next, check the inside of any significant or cracking cracks to see if they will require the use of special equipment. Significant gaps often need a combination of scraping, sanding, sealing, and stucco removal. Smaller cracks can be easily accomplished with the use of a chisel. When removing stucco from a wall, it’s essential to wear protective gear such as rubber gloves, a mask, long sleeves, and goggles.
One of the best types of tools for stucco removal is called a heavy-duty kind of sled. These are manufactured specifically for this purpose and come in different sizes and lengths with various head options. If you have a really large crack or piece of siding that has already failed to seal properly, you will probably need to use the longer head options to accomplish the task in one smooth motion.
There are also options for using a heavy-duty kind of sled for your specific stucco removal job. One of these options is called a chisel and is a larger version of the regular sander. If you don’t want to deal with a sled at all, you may want to consider purchasing an actual chisel. However, in this case, you will most likely need to rent a heavy-duty tool as the chicken wire used for this process is usually too large for the average home user.
If you aren’t comfortable using large and heavy equipment, there are other options for your Stucco Removal jobs. One of those options is the circular saw. This tool will work just like a pry bar and is usually used for very large and cracked areas.
A final way to remove stucco from your exterior walls is by using a water jet. A water jet works by spraying a high-pressure jet of water you are attempting to remove stucco from. This can be an extremely effective solution to stucco problems and a potentially harmful approach to solving your exterior wall stucco problems if not done properly. Water jets can remove a great amount of stubborn stucco, but if it is left behind after the removal, it will most likely be just as tough to remove as the previous material without using this technique.
When using either a pry bar or a circular saw to remove your stucco, you should always use the right equipment and take the right steps to ensure the job is done the first time correctly. Often people try to tackle their Stucco Removal jobs on their own with no experience. Not only can this result in faulty work, but it can also be dangerous. Always make sure you have someone with you that has experience with these types of projects. Another wise idea is to hire a professional stucco removal company. With their experience, they should know what to do to get the job done properly and safely.